Hero Me


Pro is the latest iteration in the Hero Me family. It revolves more toward high-flow hot ends.

Upon first getting involved with the Hero Me community we noticed many people routinely asking where they could obtain a printed version. Just to openly share we came across 3 requests in just the first 12 hours we were actively following the support channels.

The selection of hardware is much more limited in this line and should only be used by experienced users. This is not for someone new to the hobby. If you would like to speak to us about what you should choose, please feel free to reach out to us via the contact us form on our Contact Us page, we are happy to help.

Each kit will be printed in ABS or ABS+. Currently, we are using eSUN ABS+, Polymaker Polylite ABS, or 3DX Tech ABS-GF. We are currently also evaluating options from Filaments.Ca. With the current supply chain shortages when it comes to the raw materials to produce ABS we had to explore a few options to guarantee supply as best we could.

Production Fees Are As Follows:

$94.95US: Full Hero Me Set – Pro Line (Inventory Below)

Optional Add-Ons & Upgrades:

$14.95: The Workbench
$14.95: Skrew Kit (Inventory Below)
$24.95: ABS-GF Upgrade: Base, Gantry Adapter, Extruder Mount, Hot End Mount, and Hot End Wing.
$49.95: ABS-GF Upgrade: The Entire Kit.
$10.00: Fan Duct Upgrade – Hangtight X4 Fan Ducts.
$05.00-$14.95: Extra/Spare Pieces By Piece.

A Full Kit contains:

A base, full gantry adapter, extruder mount, hot end mount, hot end wing, full bed levelling mount, cable management beam, ADXL mount, LED Mount, and endoscope mount.

Roughly 44 threaded heat inserts will be pre-installed in your kit and optionally roughly 8 in the workbench add-on.

Additionally, your kit will be test assembles, as best we can, on our production bench before it is delivered to you.

A Screw Kit contains (Subject To Adjustment):

12x m3 – 06mm Socket Head Screw – Black Anodized
24x m3 – 08mm Socket Head Screw – Black Anodized
24x m3 – 12mm Socket Head Screw – Black Anodized
24x m3 – 16mm Socket Head Screw – Black Anodized
12x m3 – 20mm Socket Head Screw – Black Anodized
12x m3 – 25mm Socket Head Screw – Black Anodized
04x m3 – 30mm Socket Head Screw – Black Anodized
04x m3 – 35mm Socket Head Screw – Black Anodized

Note: Since Hero Me does not ever use hex nuts or washers none are included.

Shipping is NOT included in these prices.

Each kit is made to order and may take 3-4 weeks to ship depending on current volumes and requested configurations. Currently, we are shipping in 6-10 business days.

Currently, 85+ 3D Printer models are supported:

  • Alfawise U20 and U30
  • Anet A8, ET4, ET5, & E10
  • Anycubic Vyper, Chyron, i3 Mega S, Mega Zero, Kobra Go
  • BigTreeTech HermitCrab
  • BIQU B1
  • BLV Ender 3 Linear Rail Upgrade
  • BLV MGN Cube CoreXY
  • Creality CR-6SE
  • Creality CR-10, CR-10 V2, & V3
  • Creality CR-10S, S4, & S5
  • Creality CR-10S Pro, V2, & V3
  • Creality CR-20
  • Creality CR-MAX
  • Creality CR-10 Mini
  • Creality Ender 3 & 3X
  • Creality Ender 3 V2 & V2 Neo
  • Creality Ender 3 Pro
  • Creality Ender 3 MAX
  • Creality Ender 5
  • Creality Ender 5 Pro
  • Creality Ender 5 Plus
  • Creality Ender 6 CoreXY
  • Elegoo Neptune 2, 2S, 3, X, & 3 Pro
  • Eryone Thinker SE
  • Exoslide
  • Geeetech A10, A20, & A30
  • Kingroon KP3S
  • Kywoo
  • Labists ET4
  • Lantro
  • Linear Rail Block Mount MGN9-H, MGN12-C, & MGN12-H
  • Longer LK1 & LK5 Pro
  • Micro Swiss DD kits (Ender 3, Ender 5, Exoslide, & Linear Rails)
  • OpenBuilds Mini V
  • PrinterMods xChange & MDD kit V1.2 & V1.3
  • RepRap i3 Clones
  • Prusa MK3S/+
  • SainSmart Coreception 300
  • Sovol SV01, SV02, & SV05
  • Sunlu S8
  • Tevo Tarantula Pro & Tornado
  • Tronxy X5SA Pro
  • Two Trees Bluer, Sapphire Pro, & Sapphire Plus
  • Wham Bam MUTANT
  • Wham Bam Universal X carriages
  • Voron Switchwire
  • Voxelab Aquila-Pro
  • ZYLTech Gear V3
  • Most Clones of Creality CR and Ender Printers

The following Direct Drive Extruders are supported:

  • Advanced 3D Printing FXD
  • Bondtech BMG (Standard & Mirrored)
  • Bondtech BMG-M (Standard & Mirrored)
  • Bondtech LGX
  • Bondtech LGX Lite
  • DyzeXtruder Pro
  • Orbiter V1.5 & V2.0 (Standard & Mirrored)
  • Phaetus APUS
  • Sherpa Mini
  • VZ-HextrudORT

The following Hotends are supported:

  • Creality Spider 3 (350)
  • Creality Spider 3 (500)
  • Creality Spider 3 Pro
  • E3D V6 & Volcano
  • E3D Revo Six
  • E3D Revo Voron
  • Micro Swiss All Metal
  • MK8
  • Phaetus Dragon SF, HF, & UHF (Collar or 4 Screws)
  • Phaetus Dragonfly HIC
  • Phaetus DropEffect XG
  • Phaetus Rapido HF, UHF (Collar or 4 Screws)
  • Phaetus Rapido Plus HF, UHF (Collar or 4 Screws)
  • Phaetus X Voron Dragon
  • Slice Copperhead (Collar or 4 Screws)
  • Slice Mosquito & Mosquito Magnum

The following ABL sensors are supported:

  • BLTouch
  • CR Touch
  • Creality OEM Inductive Probe (18mm)
  • EZABL Pro (18mm)
  • EZABL Pro Mini (8mm)
  • Generic Inductive Probes 8mm, 12mm & 18mm sensors
  • Omron
  • PL-08N
  • HallON
  • TA Sensor
  • Touch Mi
  • Clones of Any of The Above Listed Sensors

The following fans are supported:

  • 4020 (Single and Dual)
  • 5015 (Single and Dual)

The following additional options are supported:

  • ADXL 345 – Various Sizes
  • Endoscope Cameras
  • LED Strip Lighting
  • Analog Dial Gauges